 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOS FET Relays Slim, 2.1-mm High Relay Incorporating a MOS FET Optically Coupled with an Infrared LED in a Miniature, Flat SOP Package * New models with 2 channels and an 8-pin SOP package included in 350-V load voltage series. * Continuous load current of 110 mA. * Dielectric strength of 1,500 Vrms between I/O. Note: G3VM-352J Application Examples * Broadband systems * Measurement devices * Data loggers * Amusement machines The actual product is marked differently from the image shown here. List of Models Contact form DPST-NO Terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model G3VM-352J G3VM-352J(TR) Number per stick 50 --Number per tape --2,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-352J 4.40.2 9.40.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54 0.10.1 0.40.1 0.50.3 7.00.4 Weight: 0.2 g Terminal Arrangement/Internal Connections (Top View) G3VM-352J 8 7 6 5 1 2 3 4 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-352J 6 to 6.3 1.2 0.8 2.54 2.54 82 G3VM-352J Absolute Maximum Ratings (Ta = 25C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Output Output dielectric strength Continuous load current ON current reduction rate Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Symbol IF IFP D IF/C VR Tj VOFF IO D ION/C VI-O Ta Tstg --Rating 50 1 -0.5 5 125 350 110 -1.1 1,500 -40 to +85 -55 to +125 260 Unit mA A mA/C V C V mA mA/C Vrms C C C Ta 25C AC for 1 min With no icing or condensation With no icing or condensation 10 s 100 ms pulses, 100 pps Ta 25C Measurement Conditions G3VM-352J Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Electrical Characteristics (Ta = 25C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 ----------Current leakage when the relay is open Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time ILEAK CI-O RI-O tON tOFF ----1,000 ----Typical 1.15 --30 1 25 35 --0.8 --0.3 0.1 Maximum 1.3 10 --3 35 50 1.0 ----1 1 V mA pF mA W W mA pF MW ms ms Unit Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz IO = 110 mA IF = 5 mA, IO = 110 mA, t < 1 s IF = 5 mA, IO = 110 mA VOFF = 350 V f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH 60% IF = 5 mA, RL = 200 W, VDD = 20 V (See note 2.) VOUT IF Note: 2. Turn-ON and Turn-OFF Times IF (3) 1 (4) 2 8 (6) 7 (5) RL VDD VOUT 10% tON 90% tOFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Output dielectric strength Operating LED forward current Continuous load current Operating temperature Symbol VDD IF IO Ta --5 --- 20 Minimum --10 ----Typical Maximum 280 25 100 65 V mA mA C Unit Engineering Data Load Current vs. Ambient Temperature G3VM-352J Load current (mA) Safety Precautions Refer to page 6 for precautions common to all G3VM models. 140 120 100 80 60 40 20 0 -20 0 20 40 60 80 100 Ambient temperature (C) 83 |
Price & Availability of G3VM-352JTR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |